5.56 DIAMONDBACK DB-15 SEMI AUTO RIFLE / NEW 
EGW SCOPE BASE 42800 SAVAGE AXIS 0 MOA
$39.99
SCROLL DOWN FOR ADDITIONAL DETAILS
CLICK ON THE PICTURE TO SEE A LARGER IMAGE.
3 in stock
Description
This picatinny mount fits:
- Savage Edge – All Calibers (Drilled for #6-48 Screws)
- Savage AXIS – All Calibers (Drilled for #6-48 Screws)
- Savage AXIS II – All Calibers (Drilled for #6-48 Screws)
- Savage AXIS XP – All Calibers (Drilled for #6-48 Screws)
- Savage AXIS II – All Calibers (Drilled for #8-40 Screws)
- Savage AXIS II XP – All Calibers (Drilled for #8-40 Screws)
- Any other Savage Axis we forgot to mention – All Calibers
EGW recommends making sure the threaded holes are completely clear of any debris before installing the rail. Place the rail on the receiver with the overhang facing forward, place a small dab of blue thread locker on the provided mounting screws and torque them to 20 in/lbs.
One of the most common problems with Savage Axis scope mounts is they don’t come with the correct mounting screws. Savage started manufacturing some Axis receivers with larger #8 screws. Not all aftermarket manufacturers have changed their scope mount designs, but we have! Our picatinny scope mounts for the Savage Axis all come drilled out for the larger screws. EGW provideS both the #8 and #6 screws as well, so no matter which model Axis you have, our base is guaranteed to fit!
This mount is ambidextrous.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite
EGW recommends:
0 MOA – if shooting 0-500 yards
20 MOA – if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.
Additional information
| MANUFACTURER |
|---|
